Installation Instructions
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
Pencil and |
| Duct tape |
Phillips and | ||
tape measure | Flat blade screwdrivers |
|
|
|
|
Electric drill with | ¼” pivoting hex socket |
1/8” and3/8” bits |
|
Spirit level | Safety glasses |
|
Flashlight
cUL Listed Wire nuts
Pliers
Hammer
Metal snips
Wire Cutter/Stripper
Saber saw or Key Hole Saw
Ladder |
|
|
Allen Wrench |
•120V 60Hz. 15 or 20 Amp, 2 wire with ground. Properly grounded branch circuit.
•Strain relief for junction box.
•7” round metal duct or 3¼” x 12” rectangular duct, length to suit installation.
OPTIONAL ACCESSORIES
Kit 02279 | Model PVIG940 | MAX 48.4” |
| extension chimney (H) | |
| MIN 34.8” | |
|
| |
Kit 02280 | Model PVWG936 | MAX 52” |
| extension chimney (H) | MIN 36.4” |
Kit 02281 | Models PVWS930/936 | MAX 52” |
| extension chimney (H) | |
|
| MIN 36.4” |
Ductless Recirculating Kit
Kit 02282 Models PVWS930/936, PVWT936 Carbon Filter + Filtrating Deflector: Changes Hood from Venting to Filtrating
Kit 02283 Models PVWG936 , PVIG940 Carbon Filter + Filtrating Deflector + Rounded transition: Changes Hood from Venting to Filtrating
PARTS PROVIDED
MODELS PVWS930, PVWS936 AND PVWT936
•Hood canopy with internal blower, grease filters and lights already installed
•Duct covers
•Duct Cover support bracket
•Transition (may be already installed)
•Hardware Packet:
Note: the hardware packet contains several fittings material. For models PVWS930, PVWS936 and PVWT936, consider what is listed below ONLY:
•
•Hook with leveling screws x 2
•Template
•Use, Care and Installation Guide
•10 x 60 drywall anchors x 2 (To attach duct cover support bracket)
•6 x 80 screws x 8 + washers x 8 (2 To attach duct cover support bracket + 6 to attach the hood canopy)
•3,5 x 9,5 screws x 6 (2 to attach the transition + 4 to attach the duct cover)
1 Ft = 0.3 m 1” = 2.5 cm
1 0
