17
TELEPHONE OPERATION

MAKING AND RECEIVING

A CALL

To make a call, lift the handset and press
TALK. When you hear the dial tone, dial
the desired phone number or memory
number (see “Memory Dialing” on
Page 19).
To answer a call if the handset is on the
base, simply lift the handset and begin
your conversation. If the handset is away
from the base, press TALK. The TALK in-
dicator on the handset and the IN USE
indicator on the base light.
To end a call, press TALK on the handset
or place the handset on the base. The
TALK and the IN US E indicators turn off .
Note: If you press TALK to hang up and
the phone does not disconnect, place
the handset on the base.

SETTING THE HANDSET’S

VOLU ME

You can change the handset’s volume
during a call by repeatedly pressing
VOLUME. The volume steps up and
down the three settings (low, medium,
and high) and remains set for subse-
quent calls.
Note: The TAD-732 sounds a few beeps
when it reaches the lowest or the high-
est volume setting.

CHANGING THE

CHANNEL

The TAD-732 has 20 channels (frequen-
cy pairs used between the base and
handset). It automatically selects a clear
channel each time you make or receive
a call.
If you hear other conversations or ex-
cessive noise during a call, press CHAN-
NEL on the handset to select a different
channel.
Note: If the handset is too far from the
base, the channel might not change.
Move closer to the base and try again.
43-732.fm Page 17 Friday, August 13 , 1999 1:42 PM