Installation Instructions
Zoneline Air Conditioners
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•IMPORTANT – Save these
instructions for local inspector’s use.
•IMPORTANT – Observe all
governing codes and ordinances.
•Note to Installer – Be sure to leave these instructions with the owner.
•Note to Owner – Keep these instructions for future reference.
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered under the Warranty.
TOOLS YOU WILL NEED
Phillips screwdriver
IMPORTANT ELECTRICAL SAFETY—READ CAREFULLY
CAUTION:
•Follow the National Electrical Code (NEC) or local codes and ordinances.
•For personal safety, this Zoneline must be properly grounded.
•Protective devices (fuses or circuit breakers) acceptable for Zoneline installations are specified on the nameplate of each unit.
•Do not use an extension cord with this unit.
•Aluminum building wiring may present special
•When the unit is in the OFF position, there is still voltage to the electrical controls.
•Disconnect the power to the unit before servicing by:
1Removing the power cord (if it has one) from the wall receptacle.
OR
2Removing the branch circuit fuses or turning the circuit breakers off at the panel.
ZONELINE COMPONENTS |
Zoneline unit |
Room cabinet* |
Power supply kit** |
Exterior grille/louver** |
Wall case** |
** Shipped with the Zoneline unit |
** Check the “Essential Elements” list on the unit |
11 |
