INSTALLATION

1. Steady, flat location.

This microwave oven should be set on a steady, flat surface.

2. Leave space behind and side.

All air vents should be kept a clearance. If all vents are covered during operation, the oven may be overheated and, eventually, cause oven failure.

3. Away from radio, and TV sets

Poor television reception and radio interference may result if the oven is located close to a TV, radio, antenna, or feeder and so on. Position the oven as far from them as possible.

4. Away from heating appliances and water taps

Keep the oven away from hot air, steam or splash when choosing a place to position it, or the insulation might be adversely affected and breakdowns occur.

5.Power supply

•Check your local power source.

This microwave oven requires a current of approximately 15 amperes, 120Volts, 60Hz grounded outlet.

1.A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or trippping over a longer cord.

2.Longer cord sets or extension cords are available and may be used if care is exercised in their use.

3.If a long cord or extension cord is used:

1)The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.

2)The extension cord must be a grounding type 3-wire cord.

3)The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally.

6. Examine the oven after unpacking for any damage such as:

A misaligned door, broken door or a dent in cavity.

If any of the above are visible, DO NOT INSTALL, and notify dealer immediately.

45

Page 46 Page 48
Page 47
Image 47
GE TMW-1100MC, TMW-1100EC, TMW-800TC manual Steady, flat location
Page 46 Page 48

TMW-1100MC, TMW-1100E, TMW-1100M, TMW-800TC, TMW-1100EC specifications

The GE TMW series of gas turbines, particularly the TMW-800T, TMW-1100EC, TMW-800TC, TMW-1100M, and TMW-1100E, represent some of the most advanced technology in power generation, designed for efficiency and reliability.

The TMW-800T is renowned for its compact design and high efficiency, making it ideal for both utility and industrial applications. This turbine boasts a modular design that facilitates ease of maintenance and installation, while its advanced aerodynamics contribute to enhanced performance and reduced emissions. Additionally, its ability to operate on multiple fuel types allows for greater operational flexibility.

Similarly, the TMW-1100EC model offers enhanced power output and efficiency. It incorporates advanced combustion technology that minimizes nitrogen oxide emissions, complying with increasingly stringent environmental regulations. The electronic control system in this model allows for superior performance management and load-following capabilities, ensuring optimal performance under varying demand.

The TMW-800TC variant focuses on achieving high thermal efficiency while maintaining significant output levels. Its cooling technologies, including advanced blade cooling techniques and heat recovery systems, enable this turbine to sustain higher operating temperatures, improving its overall efficiency. This design is particularly beneficial in combined cycle power plants, where waste heat can be repurposed to generate additional electricity.

The TMW-1100M is particularly noteworthy for its versatility and adaptability in a wide range of applications, from cogeneration to standalone power generation. Its design includes robust materials and components engineered to withstand rigorous operating conditions, ensuring longevity and reliability, which is essential for industrial users who depend on consistent power availability.

Lastly, the TMW-1100E emphasizes operational efficiency through its advanced control systems and intelligent monitoring. This turbine is equipped with sensors and software that provide real-time data analytics, allowing for proactive maintenance and operational optimization. This technology not only enhances performance but also contributes to lower operational costs.

In summary, the GE TMW gas turbine series, with their various models, exemplify cutting-edge technology and engineering. Their main features include high efficiency, reduced emissions, operational flexibility, and advanced control systems, making them a preferred choice for power generation in both industrial and utility markets. Their adaptability to different fuels and operational environments further solidifies their stance as leading solutions in the gas turbine landscape.
Top Page Image Contents