DISASSEMBLY AND ASSEMBLY

Cautions to be observed when trouble shooting.

Unlike many other appliances, the microwave oven is high-voltage, high-current equipment. It is completely safety during normal operation.

However, carelessness in servicing the oven can result in an electric shock or possible danger from a short circuit. You are asked to observe the following precautions carefully.

1.Always remove the power plug from the outlet before servicing.

2.Use an insulated screwdriver and ware rubber gloves when servicing the high voltage side.

3.Discharge the high voltage capacitor before touching any oven components or wiring.

(1)Check the grounding.

Do not operate on a 2-wire extension cord.

The microwave oven is designed to be used with grounded.

It is imperative, therefore, to make sure it is grounded properly before beginning repair work.

(2)Warning about the electric charge in the high voltage capacitor.

For about 30 seconds after the operation stopped and electric charge remains in the high voltage capacitor.

When replacing or checking parts, short between oven chassis and the negative high terminal of the high voltage capacitor, by using a properly insulated screwdriver to discharge.

4. When the 15A fuse is blown out due to the operation of the monitor switch; replace primary interlock switch, secondary interlock switch and interlock monitor switch.

5. After repair or replacement of parts, make sure that the screws are

properly tightened, and all electrical connections are tightened. 6. Do not operate without cabinet.

CAUTION : Service personnel should remove their watches whenever working close to or replacing the magnetron.

WARNING : When servicing the appliance, need a care of touching or replacing high potential parts because of electrical shock or exposing microwave. These parts are as follows - HV Transformer, Magnetron, HV Capacitor, HV Diode.

47

Page 48 Page 50
Page 49
Image 49
GE TMW-1100EC, TMW-800TC, TMW-1100MC manual Disassembly and Assembly
Page 48 Page 50

TMW-1100MC, TMW-1100E, TMW-1100M, TMW-800TC, TMW-1100EC specifications

The GE TMW series of gas turbines, particularly the TMW-800T, TMW-1100EC, TMW-800TC, TMW-1100M, and TMW-1100E, represent some of the most advanced technology in power generation, designed for efficiency and reliability.

The TMW-800T is renowned for its compact design and high efficiency, making it ideal for both utility and industrial applications. This turbine boasts a modular design that facilitates ease of maintenance and installation, while its advanced aerodynamics contribute to enhanced performance and reduced emissions. Additionally, its ability to operate on multiple fuel types allows for greater operational flexibility.

Similarly, the TMW-1100EC model offers enhanced power output and efficiency. It incorporates advanced combustion technology that minimizes nitrogen oxide emissions, complying with increasingly stringent environmental regulations. The electronic control system in this model allows for superior performance management and load-following capabilities, ensuring optimal performance under varying demand.

The TMW-800TC variant focuses on achieving high thermal efficiency while maintaining significant output levels. Its cooling technologies, including advanced blade cooling techniques and heat recovery systems, enable this turbine to sustain higher operating temperatures, improving its overall efficiency. This design is particularly beneficial in combined cycle power plants, where waste heat can be repurposed to generate additional electricity.

The TMW-1100M is particularly noteworthy for its versatility and adaptability in a wide range of applications, from cogeneration to standalone power generation. Its design includes robust materials and components engineered to withstand rigorous operating conditions, ensuring longevity and reliability, which is essential for industrial users who depend on consistent power availability.

Lastly, the TMW-1100E emphasizes operational efficiency through its advanced control systems and intelligent monitoring. This turbine is equipped with sensors and software that provide real-time data analytics, allowing for proactive maintenance and operational optimization. This technology not only enhances performance but also contributes to lower operational costs.

In summary, the GE TMW gas turbine series, with their various models, exemplify cutting-edge technology and engineering. Their main features include high efficiency, reduced emissions, operational flexibility, and advanced control systems, making them a preferred choice for power generation in both industrial and utility markets. Their adaptability to different fuels and operational environments further solidifies their stance as leading solutions in the gas turbine landscape.
Top Page Image Contents