GE TS0861 dimensions Description, Dimensions Installation Overview

Description	The TS0861 Magnetic Swipe Card Reader is designed to
	mount on metal window or door frames (mullions or
	architraves) and is suitable for any indoor location that
	requires a small reader.
	The TS0861 incorporates all interface electronics necessary
	to interface to the TS0862 Smart Door Controller. The
	reader operates on +5VDC supplied directly from the
	TS0862.
	The TS0861 may also be used with other suitably-configured
	products that have a Wiegand interface, including the
	TS0867 4-Door Controller, TS0802 8-Area Arming Station,
	and third-party devices.
Dimensions

Installation

Overview

Details will vary when installing to other interfaces.

The overall process of installing the TS0861 and connecting to a TS0862 Smart Door Controller is as follows:

1.IMPORTANT — Set the pwr link on the TS0862 to +5 volts. Do not use any other voltage to power the TS0861.

2.Mount the TS0861 using suitable hardware.

3.Check for correct operation using a suitable Magnetic Swipe Card.

2 TS0861 Magnetic Swipe Card Reader Installation Guide