Setting Up and Using OpenLCR
42
1Press once and once.
2Press once and once.
3Press
4Enter a 2-digit number (“01” to “ 29”)
for the number of minutes of the
SHORT TIME setting. (If the number is
less than 10, enter a 0 before the
number.)
5Enter a 2-digit number for the number
of minutes of the LONG TIME setting.
(The number must be greater than the
SHORT TIME setting and no more than
30.)
•Note: If the display shows NO
SERVICE, you must first download the
rate data.
6Press to begin receiving the rate data for the new settings.
•Your fax calls OpenLCR and receives the data. This lasts one or two
minutes.
•Note: If you do not press to receive new data, the settings will
revert to their previous state.
FUNCTION
START/MEMORY
START/MEMOR
Y
Display:
The display briefly shows
your selection, then:
The display briefly shows
your selection. If the
settings were changed, it
will then show:
♦When you change the SHORT TIME and/or LONG TIME setting, the fax
machine will automatically call OpenLCR and receive rate data for the new
times.
START: DOWNLOAD
LONG TIME
SHORT TIME
LCR SETTING
LCR TIME