Sending a Fax by Automatic Dialing
83
5. Sending
Faxes
1If you are sending a fax, load the
document(s).
If desired, press to set the
resolution and/or contrast.
2Press once. <REDIAL> appears in the display, followed by the last
number dialed. Make sure the number that appears is the number you
wish to dial.
3If you are sending a fax, press . Dialing begins.
If you are making a phone call, lift the handset. Dialing begins.
RESOLUTION/
RECEPTION MODE
START/MEMORY

Redial

You can automatically redial the last number dialed on the fax machine. This
procedure can be used to send a fax or make a phone call.
Note: The fax machine and the cordless handset each retain their own
separate redial numbers.

Automatic redialing

If you use automatic dialing (including Direct Keypad Dialing) to send a fax
and the line is busy, the fax machine w il l au tom ati ca lly red ial the n um ber. The
fax machine will make three redial attempts at intervals of fiv e min utes. During
this time, RECALLING will appear in the display, followed by a two-digit
number assigned to the fax job. You will not be able to dial any other locations
while the message appears.
Note: If a fax transmission is unsuccessful and DOCUMENT JAMMED
appears in the display, remov e th e docum ent as e xplai ned on p age 123. (This
may occur if the other fax machine doesnt respond properly when you
attempt to send the document.)