References
Location of Controls
Back Panel
ANT IN
VIDEO AUDIO
IN
RF OUT
OUT
CH 3 
CH 4
CH3 CH4 Switch
Selects the channel to which you tune the TV to see the VCR picture if you connect the VCR using one of the basic hookups.
ANT (Antenna) IN Connector
Receives a signal from an antenna or cable system when attached.
RF OUT Connector
Passes signal to TV using the cable supplied.
VIDEO IN and AUDIO IN Jacks
Receives signals from another component like a VCR or camcorder when it is connected to these jacks. Use INPUT on the remote to select.
VIDEO OUT and AUDIO OUT Jacks
Sends signals from VCR to another component like a VCR or camcorder when it is connected to these jacks.
23
