VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
5 Audio
6 Language
Setting Up the VCR
Startup
8
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: ANTENNA
4 Cable Box Setup
0 Exit
5. Select the language/Seleccione el idioma/Sélectionner la langue.
The VCR displays the on-screen menus in the English, Spanish
or French language. The word “Language” cycles through the
different languages when the VCR Main Menu is displayed on
the TVscreen. The arrow indicates which language is selected.
A. Press MENU on remote to display the VCR MAIN MENU.
B. Press 6to display the LANGUAGEor IDIOMA or LANGUE
menu. (English: LANGUAGE; Spanish: IDIOMA; French:
LANGUE).
•Press 1 to have the menus displayed in English (Ingles).
• Press 2 to have the menus displayed in Spanish
(Español).
• Press 3 to have the menus displayed in French
(Français).
6. Place channels in the VCR’s memory.
The AUTOCHANNEL SEARCH feature memorizes the channel
list available through your signal type—cable or antenna. The
signal type is automatically selected during auto channel
search. Also, if you change your signal system, you must
perform AUTOCHANNEL SEARCH again.
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV tunes to the lowest channel
found. Pressing CHANNELup or down selects only the active
channels.
A.Press MENU to display the VCR MAIN MENUon the TV
screen. If this menu does not appear:
• Make sure the TV is tuned to same channel as the CH 3/4
switch on the VCR or the TV’s video input (refer to TV’s
manual).
• If you use a basic hookup, check the VCR indicator in
display panel — it should be on. Press TV•VCRto turn
it on.
• Check the connections.
B. Press 3to display the CHANNELS menu.
C. Press 1to begin AUTO CHANNEL SEARCH.
The VCR automatically selects the CABLE (cable TV) or
ANTENNAsignal. For cable connection, 125 channels are
searched; for the antenna connection, 69 channels are
searched.
To change the Signal Type:
A. Follow steps A-B above.
B. Press 3to switch the Signal Type between CABLE and
ANTENNA.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
5 Audio
6 Language
0 Exit
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
LANGUAGE
Select a language.
1➛English
2 Español
3 Français
Press MENU to continue