VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
20
Recording a Program
Recording While You’re Away (Timer Recording)
Select Cable Box Viewing Channel
If you have a cable box, follow the directions below.
1. Press MENUon the remote to display the VCR MAIN
MENUon the TV screen.
2. Press3 to displayCHANNELS menu.
3. Press4 to displayCable Box Setup menu.
4. Select one of the three options:
1 ALL Channels
• Press 1for ALLchannels and then enter two
numbers for the output channel of your cable
box. (Valid numbers are 01-13.)
• Press CLEARto correct an entry.
If you connected your cable box to the VCR
using the cable box’s AUDIO/VIDEO OUTjacks,
press INPUTon the VCR to select VIDEO IN
option.
•Press MENU. A message appears which will
time out or press MENUto return to VCR MAIN
MENU.
VCR will now automatically enter the output
channel of your cable box in the Timer
Recordingsmenu.
2 Only SOME Channels
Skip this setup if your cable box is not required for
all channels.
• Press 2for Only SOME channels.
• Press MENUto continue.
3 Cancel setup
• Press 3to cancel the CABLEBOX SETUP
feature.
• Press MENUto continue.
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4 or Video)
--
Press 01-13 or INPUT
Press MENU to cancel
CABLE BOX SETUP
The feature works only
if the cable box is used
to receive ALL channels.
Consult your User's
Manual for assistance.
Press MENU to continue
CABLE BOX SETUP
The Cable Box Setup
was canceled.
The VCR will NOT control
the cable box channel
during timer recordings.
Press MENU to continue
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: ANTENNA
4 Cable Box Setup
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup