DIP 1 Edid Mode, DIP 2* Deep Color | Gefen EXT-HDMI1.3-1FO specs

DIP SWITCH CONFIGURATION

DIP 1 - EDID Mode

•OFF - Local EDID

When Local EDID mode is used, the EDID will be assembled by copying all video and audio features of the connected device. Deep Color support will be manually controlled: If Deep Color is supported by the display(s), DIP 2 should be set to the ON position (see DIP 2 - Deep Color, below). By default, the unit is shipped with DIP 1 in the OFF position.

•ON - Pass-Through EDID

Allows all video and audio features of the connected devices to be passed to the source device without control over Deep Color.

DIP 2* - Deep Color

NOTE: DIP switch 2 is only functional when DIP switch 1 is set to the OFF posi- tion.

•OFF - Enables Deep Color support (12-bit color)

Enables Deep Color support. In Pass-through EDID Mode, setting DIP2 = OFF has no effect since all EDID information is passed through.

•ON - Forces 8-bit Color

Disables Deep Color in the EDID. Deep Color management is only available when Local EDID is being used.

DIP 3 - Calibration Mode

•OFF - Enables Calibration Mode

Enables Calibration Mode. Make sure to set DIP switch 3 on both the Sender Unit and Receiver Unit when calibrating the Extenders. See page 11 for details.

•ON - Calibration Mode Lock

Locks the calibration settings. Set DIP switch 3 on both the Sender Unit and Receiver Unit to the ON position after the calibration process has completed. See page 11 for details on the calibration process.

EXT-HDMI1.3-1FO specifications

The Gefen EXT-HDMI1.3-1FO is a cutting-edge HDMI fiber optic extender designed to deliver high-definition audio and video signals over long distances without compromising quality. This device is an essential solution for various professional and home theater applications where long cable runs are necessary, especially in environments where traditional copper HDMI cables may face signal degradation.

One of the standout features of the EXT-HDMI1.3-1FO is its capability to extend HDMI signals up to 1,000 feet (approximately 300 meters) via a single fiber optic cable. This significantly surpasses the limitations of standard HDMI cables, which typically support transmission only up to 50 feet (15 meters) without signal loss. The use of fiber optic technology allows for high bandwidth capabilities, making the unit compatible with 1080p resolutions and even 4K video formats, ensuring crystal clear visuals without latency or distortion.

In addition to video, the EXT-HDMI1.3-1FO supports multi-channel audio formats, providing a comprehensive solution for transmitting both video and audio signals. The extender handles various audio formats, including LPCM, Dolby Digital, and DTS, catering to diverse audio needs in entertainment and professional environments.

The installation process is straightforward, with minimal setup required. The unit features a compact design, allowing for easy placement in any setting. It includes both a sender and a receiver unit, which connect seamlessly to HDMI components such as Blu-ray players, gaming consoles, and projectors. The built-in EDID (Extended Display Identification Data) management ensures that the source and display devices communicate effectively, optimizing the output quality for the best possible viewing and listening experience.

Another significant characteristic of the Gefen EXT-HDMI1.3-1FO is its robust build quality, designed to withstand the rigors of professional use. Moreover, it is capable of operating in a range of environmental conditions, making it suitable for both indoor and outdoor applications.

In summary, the Gefen EXT-HDMI1.3-1FO is an innovative HDMI fiber optic extender that offers exceptional flexibility in high-definition signal transmission, supporting long distances, multiple audio formats, and easy connectivity, making it an ideal choice for high-performance AV installations.

Gefen EXT-HDMI1.3-1FO user manual DIP 1 Edid Mode, DIP 2* Deep Color, DIP 3 Calibration Mode

Models: EXT-HDMI1.3-1FO