DIP SWITCH CONFIGURATION
DIP Switches
On the bottom of the Sender Unit and Receiver Unit are a bank of four (4) DIP switches. These DIP switches provide control over EDID, Deep Color, and unit Calibration.
Remove the strip of tape to expose the DIP switches. To change the DIP switch settings, move the appropriate DIP switch to its ON or OFF position using a small pointed object. The DIP switches and their functions are shown below.
| Sender Unit DIP switches |
|
|
DIP Switch | Function |
1 | EDID Mode: Local (OFF) or External (ON) |
|
|
2 | Deep Color Mode: |
|
|
3 | Calibration Mode: On (OFF) or Lock (ON) |
|
|
4 | NOT USED |
| Receiver Unit DIP switches |
|
|
DIP Switch | Function |
1 | NOT USED |
|
|
2 | NOT USED |
|
|
3 | Calibration Mode: On (OFF) or Lock (ON) |
|
|
4 | NOT USED |
|
|
9
