![](/images/new-backgrounds/1127334/12733415x1.webp)
SENDER UNIT DESCRIPTIONS
1Power Indicator
This
2Calibration Indicator
This LED will alternate from red to green during the calibration procedure. The LED will turn solid green once the calibration procedure has been completed.
3IR Blaster Port
Connect an IR Blaster cable (Gefen part #
4Locking HDMI Input Port
Connect a
5
Connect the controlling device to this port.
6Fiber Optic Connector (SC-Type)
This connector accepts 1 strand of
75V DC Locking Power Connector
Connect the included 5V DC Locking Power Supply to this receptacle.
5