Gefen EXT-HDMI1.3-1FO user manual SC-SC Fiber Optic Cable Hdmi Cable

CONNECTING AND OPERATING THE

GEFEN EXTENDER FOR HDMI 1.3 OVER ONE FIBER WITH IR

How to Connect the Extender for HDMI 1.3 over One Fiber with IR

1.Connect a Hi-Def source to the Sender Unit using the included Locking HDMI cable. Connect the HDTV display to the Receiver Unit with a user-supplied HDMI cable.

2.Connect an SC-terminated fiber optic cable to the Sender Unit. Connect the opposite end of the fiber cable to the Receiver Unit.

3.OPTIONAL: Connect an RS-232 cable from the RS-232 serial port on the controlling device to the RS-232 port on the Sender Unit. Connect another RS-232 serial cable from the RS-232 port on the Receiver Unit to the RS- 232 port of the RS-232 device.

4.IMPORTANT: Before connecting the power supplies to the Sender Unit and the Receiver Unit, see page 11 for information on calibrating the Sender Unit and Receiver Unit.

After the Sender Unit and Receiver Unit have been properly calibrated, a vibrant HDTV HD picture will be seen, along with multichannel digital audio (if the display supports audio).

Wiring Diagram for the Extender for HDMI 1.3 over One Fiber with IR

SC-SC FIBER OPTIC CABLE

HDMI CABLE

HDMI Source

Receiver

Sender

HD Display

(Up to 1,000 ft)

EXT-HDMI1.3-1FO

8