Pioneer D2000SPL owner manual Specifications

Specifications

Power source	14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system		Negative type
Current consumption	67 A (at continuous power, 4 Ω)
Average current drawn*	18 A (4 Ω for one channel)
	38 A (2 Ω for one channel)
	55 A (1 Ω for one channel)
Fuse		40 A ⋅ 6
Dimensions	586 (W) ⋅ 65 (H) ⋅ 282 (D) mm
Weight	9.1 kg (Leads for wiring not included)
Maximum power output	1 500 W ⋅ 1 (4 Ω) / 3 000 W ⋅ 1 (2 Ω) / 4 000 W ⋅ 1 (1 Ω)
Continuous power (14.4 V)	4 Ω, 20 Hz to 240 Hz,	1.0 % THD, 750 W ⋅ 1
	2 Ω, 50 Hz,	1.0 % THD, 1 500 W ⋅ 1
	1 Ω, 50 Hz,	1.0 % THD, 2 000 W ⋅ 1
Load impedance	4 Ω (1 Ω to 8 Ω allowable)
Frequency response	10 Hz to 240 Hz (+0 dB, –3 dB)
S/N ratio		85 dB (IEC-A network)
Distortion		0.3 % (10 W/4 Ω, 100 Hz)
Low pass filter	Cut off frequency: 40 Hz to 240 Hz
		Cut off slope: –24 dB/oct.
Subsonic filter (HPF)		Frequency: 20 Hz
		Slope: –24 dB/oct.
Bass boost	Frequency: 40 Hz to 120 Hz
		Level: 0 / 6 / 9 / 12 dB
Gain control		RCA: 400 mV to 6.5 V
Maximum input level / impedance		RCA: 6.5 V / 22 kΩ

Note:

•Specifications and the design are subject to possible modification without notice due to improvements.

*Average current drawn

•The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

18