Pioneer D2000SPL owner manual Four Amplifier Ex. Bridge, Connecting the Unit

Connecting the Unit

Four Amplifier (Ex. Bridge)

		Connect to a car stereo.
MODE SELECT switch		For details, see the
	SYNC	“Connection Diagram”.
must be in MASTER
	OUTPUT
position.

MODE SELECT		Connecting wire with
switch must be in		RCA pin plugs (sold
SYNC INV position.		separately).
Before setting to the	SYNC		Connecting speaker
position, remove the
screw and the stopper.	OUTPUT		wire (sold separately).

MODE SELECT	SYNC
switch must be in
	INPUT
SYNC INV position.
Before setting to the	SYNC
position, remove the
screw and the stopper.	OUTPUT

MODE SELECT	SYNC
switch must be in	INPUT
SYNC INV position.
Before setting to the
position, remove the
screw and the stopper.

SYNC

INPUT

Connecting wire with RCA pin plugs (sold separately).

Connecting wire with RCA pin plugs (sold separately).

Connecting speaker wire (sold separately).

2 Ω to 16 Ω

8 000 W (2 Ω DVC)

•Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple speakers with a bridge, check that the synthetic impedance is at least 2 Ω.

13