hpOrt@ Safety Instructions (continued)
@
●The laundry-process can reduce For washer operation
theflame retardancyofflabrics.To SA~ THESE “
●Do not leavewasher lid up
avoidsuch ~result, the gament during cycle. This will stop the INSTRUCTIONS ~.
maiwfacturer’s &ireinstructions wash and spin action and prevent
should be followed very carefully. completion of the cycle.
How to operate your clothes washer
W~G—To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTA~ SAFETY INSTRU~IONS before operating this appliance.
W8sVSpm Speeds Var#able Water Level Wash/lhnse Temp Extra Rtnse
CA
Regular cycles
n-
‘;~~
~
n
@
,. a=.D~~:iZKC, ‘~:@::ww ““”@”” ~~@%:,P,eWashCv.,e
$NmwAl ExtraChwst Odes ‘
Sorting and Loading
●Sort clothes carefhlly by fabric
type, weight, color and amount of
soil according to instructions on
page 11.
cRemove Filter-Flo@ pan and
Mini-BasketT” tub. The underside
of the lid is agood place to put the
pan while loading or unloading
clothes.
Do not use Mini-Basket tub when
washing regular loads. You’ll find
complete details on how and when
to use the Mini-Basket tub on
page 10.
@Addmeasured amount of
detergent. See pages 13through 17
for information on detergents and
other laundry additives.
●Load clothes into the wash
basket. being careful not to
overload. Clothes should be be]ow
the retaining ring. See page 12for
more loading information.
●Position the Filter-Flo pan on the
agitator. Lint will collect in the pan
for easy removal when the wash is
finished.
NOTE: Do not use the Filter-Flo
pan as awash basket. Do not put
any items to be washed in the
Filter-Flo pan.
cSee pages 8and 9for information
on how to use Bleach and Fabric
Softener Dispensers. For
information on bleaches and
fabric softeners, see page 17.
●Close the lid. Washer will fill but
not agitate or spin with the lid open.
Setting the Controls
Use the Controls Setting Guide on
pages 6and 7to help you make the
proper selections.
~Select Wash/Spin Speed
@Select Water Level
SMALL: Washer is less than 1/3
full of clothes.
MEDIUM: Between 1/3 and 1/2
full.
LARGE: Between 1/2and 2/3 full.
EXTR.4 LARGE: Over 2/3 full.
MINTI-B.4SKET: See instructions
on page 10.
~
If you want to increase level after
you’ve made aselection, turn knob
to “RESET” and select new IeveI.
QSelect Wash/Rinse Temperature.
Cold rinse will be automatically
provided with use of Perm Press
and Pre Wash Cycles. (An extended
cool-down spray rinse and cold-
water deep rinse are provided to
minimize setting of wrinkles. )
~select Extra Rinse, if desired.
Turning control to “ON” will
provide asecond deep rinse in the
Regular Cycle. If no Extra Rinse is
desired, turn control to “OFF:’
@Push Cycle Selector Knob in
and turn clockwise to your selected
wash setting.
*3
START
/‘“ ‘
STOP*
@Pull Cycle Selector Knob out
to start the washer. If you wish to
change setting after washer has
started, push Cycle Selector Knob
in to stop the washer and reset to
the new position. Setting can be
changed a[ any time.