GE WA5857R Opemt~G ~Structions, How to Use the Filter-Flo Pan, How to Use the Bleach Dispenser

OPEMT~G ~STRUCTIONS

(continued)

How to Use the Filter-Flo Pan

●The Filter-Flo pan is the lint

filter. Position the Filter-Flo -
pan on the agitator after	.:,:,,::::::::’::c:::>::;::,:...
	<j~~,:..; :.::::::,s..		‘ifij<~~’~$<[+
loading clothes into
	. . . .. . . .	L	..,.:; ;:::; ,li k:,
the washer. Lint is
	. . ..... . . . ..... ...g. .,,>....			:.,,.
easily seen and removed	..:.; . . .	: ..	:,.,...,: :, :..,..,:.,:,:..	~
	.....	.... .. .. . . .
after the wash is finished.	G

NOTE: Do not use the Filter-Flo pan as a wash basket. Do not put items to be washed in the Filter-Flo pan. Do not place detergent packets in the Filter-Flo pan.

The Filter-Flo pan also serves as a lid for the Mini-Basket tub. See How to Use the Mini-Basket Tub section.

How to Use the Bleach Dispenser

c Use this dispenser with	\
liquid bleach only.	)L AH
If you prefer to	~
use powdered	&d..
bleach, pour it
	m

;ot pour p~wdered bleach into the bleach dispenser.

●Measure bleach carefully. Here are some recommended amounts:

LARGE WATER LEVEL—I X cup (310 ml) liquid

SMALL WATER LEVEL—2/3 cup ( 170 ml) liquid

MINI-BASKET tub—1/4 cup (60 ml) liquid

●Pour measured amount of 1 iquid bleach directly into bleach dispenser.

●Do not overfill or allow dispenser to overflow. Avoid splashing. Undiluted bleach can cause fabric damage.

●Never pour undiluted liquid bleach directly onto clothes or into the wash basket or Mini-Basket tub.

How to Use the Soak Cycle

Pe,m

● SOAK CYCLE	Reg”la,	~F	START
temperature will
	Cycles	,...
		So.kc,c!e
automatically				~%
be cold.
				❑ :
● For a hot or		\
				0,,
		\		s,,,,
warm soak, set the		,,,”, S0(,
		.0,..,	b
Wash/Rinse Temp.		“EAW $~.
			.,

control to HOT/COLD or WARM/COLD and turn the Cycle Selector knob to NORMAL in the Regular Cycles.

Start the washer. After washer fills and begins to agitate, push in the Cycle Selector knob and turn to SOAK CYCLE. Pull out the Cycle Selector knob to complete the cycle.

●For an extended soak, allow the washer to fill and agitate for a few minutes to dissolve the soaking agent. Then push in the Cycle Selector knob to stop the washer (keep lid closed) and allow to soak for as long as desired. After desired soak period, pull out the Cycle Selector knob to complete the cycle.

8