| ge.com |
Control Panel |
|
It’s a good idea to wipe the control | Do not use abrasive cleansers, strong |
panel after each use. Clean with mild | liquid cleansers, plastic scouring pads or |
soap and water or vinegar and water, | oven cleansers on the control |
rinse with clean water and polish dry | will damage the finish. A 50/50 solution of |
with a soft cloth. | vinegar and hot water works well. |
Safety Instructions
Molded rib
Spring clip
Clear groove in stem
Control Knob
The control knobs may be removed for easier cleaning.
Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning.
Painted Surfaces
Clean with soap and water or a vinegar and water solution.
The knobs can be cleaned in a dishwasher or they may also be washed with soap and water. Make sure the inside of the knobs are dry before replacing.
Replace the knobs in the OFF position to ensure proper placement.
Do not use commercial oven cleaners, cleansing powders, steel wool or harsh abrasives on any painted surface.
Operating Instructions Care and
Glass Surfaces
To clean the outside glass finish, | Do not allow the water or cleaner |
use a glass cleaner. Rinse and polish | to run down inside the oven door |
with a dry cloth. | while cleaning. |
Cleaning
Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.
To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our
National Parts Center 1.800.626.2002
ge.com
Troubleshooting Tips Consumer Support
21
