Care and cleaning. | www.GEAppliances.com |
Cleaning the Outside
Safety
IMPORTANT: Unplug the wine chiller before cleaning.
Keep the outside clean. The cabinet can be washed with mild soap and water. Rinse thoroughly with clear water. Never use abrasive scouring powders.
Use a glass cleaner or mild soap and water and a soft cloth to clean the glass door. Do not use any abrasive powders.
Wipe the control panel with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts of soap and water, abrasives or sharp objects on the panel— they can damage it. Some paper towels can also scratch the control panel.
Do not wipe the wine chiller with a soiled dishcloth or towel. These may leave a residue that can erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish.
Stainless steel. Regularly clean and polish the stainless steel areas (on some models) with a commercially available stainless steel cleaner such as Stainless Steel Magic® to preserve and protect the fine finish. Stainless Steel Magic® is available through GE Parts and Accessories, 800.626.2002, or www.GEAppliances.com. Order part number WX10X15.
Do not use appliance wax or polish on the stainless steel.
Protect the paint finish. The finish on the outside of the wine chiller is a
With proper care, it will stay
a year.
Instructions
Instructions | Installation |
Instructions | Operating |
Cleaning the Inside
IMPORTANT: Unplug the wine chiller before cleaning.
To clean the inner liner and racks, use
a warm water and baking soda solution— about one tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans and neutralizes odors.
Rinse and wipe dry.
The vinyl door gasket may be cleaned with mild soap and water or a baking soda solution. Rinse well.
Do not use detergents, scouring powders, spray cleaners or other harsh chemicals to clean the interior.
Care and Cleaning
Defrosting
Defrost whenever frost on the inside surfaces of the storage area becomes 1/8 ″ (3 mm) thick.
Never use a heater of any kind, scraper or sharp instrument to remove frost as it may damage the wine chiller.
To defrost, unplug the wine chiller. Remove the contents and wipe inside surfaces and racks with a clean towel. If frost does not come off easily, allow the frost to melt somewhat and wipe off.
After defrosting, make sure inside surfaces are dry; then return the contents to the wine chiller and set the temperature control to the desired setting.
Consumer Support
7
