Safety Instructions

Operating Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

WATER HEATER SAFETY

Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances.

If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allowing them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

PROPER INSTALLATION

This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, you can receive one by visiting GEAppliances.com, or by calling 800.GE.CARES (800.432.2737).

Install or store where it will not be exposed to

Properly ground washer to conform with all

temperatures below freezing or exposed to

governing codes and ordinances. Follow details

the weather.

in Installation Instructions.

YOUR LAUNDRY AREA

Keep the area underneath and around your

Close supervision is necessary if this appliance is

appliances free of combustible materials such as

used by or near children. Do not allow children

lint, paper, rags, chemicals, etc.

to play on, with, or inside this or any other

 

appliance.

WHEN USING THE WASHER

 

Troubleshooting Tips

Use this appliance only for its intended purpose as described in this Owner’s Manual.

Never reach into washer while it is moving. Wait until the machine has completely stopped before opening the lid.

Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing different chemicals can produce

a toxic gas which may cause death.

Do not wash or dry articles that have been cleaned in, washed in, soaked in or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do not use or place these substances around your washer or dryer during operation.

The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully follow the garment manufacturer’s wash and care instructions.

To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the building’s distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning. NOTE: Turning the Cycle Selector Knob to an off position, or pressing PAUSE does NOT disconnect the appliance from the power supply.

Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

WHEN NOT IN USE

Consumer Support

Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they should be replaced every 5 years.

Before discarding a washer, or removing it from service, remove the washer lid to prevent children from hiding inside.

Do not attempt to repair or replace any part of this appliance unless specifically recommended in this Owner’s Manual, or in published user-repair instructions that you understand and have the skills to carry out.

Do not tamper with controls.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

2 SAVE THESE INSTRUCTIONS

Page 2
Image 2
GE WBSE3120, WLE4000, WASE5210, WWSE5200, WCSE4160, WSSE5210, S4200 owner manual Water Heater Safety, Consumer Support

S4200, WSSE5210, WCSE4160, WWSE5200, WBSE3120 specifications

The GE WLE4000, WASE5210, WBSE3120, WWSE5200, and WCSE4160 are part of GE's exceptional lineup of advanced energy management systems, offering unique features and technologies tailored for diverse applications in the field of industrial and commercial power systems.

Starting with the GE WLE4000, this model is designed as a compact solution for energy distribution and management. It offers advanced metering capabilities and real-time data analytics, allowing users to monitor energy consumption effectively. The WLE4000 features a user-friendly interface, making it easy to set up and manage energy use across different operations. Its robust design and flexibility enable integration with various existing infrastructure.

Next up is the WASE5210, which stands out for its adaptability and scalability. This system is engineered with advanced communication technologies, including IoT capabilities, facilitating seamless integration into modern smart grid applications. The WASE5210 employs machine learning algorithms to optimize energy usage and improve operational efficiencies. Its modular design allows for easy expansions or upgrades depending on the changing energy demands.

The WBSE3120 model specializes in substation automation, offering features such as fault detection, location, and isolation. Utilizing cutting-edge cybersecurity protocols, the WBSE3120 ensures data integrity and protection against external threats. With its real-time processing capabilities, it enhances decision-making processes, enabling quicker responses to electrical faults.

The WWSE5200 is engineered specifically for renewable energy applications. It supports advanced functions such as grid connectivity and energy storage management, making it a perfect choice for solar and wind energy projects. The system is equipped with sophisticated power quality monitoring tools that allow users to maintain optimal operational standards, reducing the risk of outages and inefficiencies.

Finally, the WCSE4160 model is aimed at enhancing system reliability and operational performance within industrial environments. Its advanced diagnostic tools and monitoring capabilities provide actionable insights into system health, thereby reducing downtime and maintenance costs. The WCSE4160 also incorporates smart grid technologies, allowing for advanced demand response strategies tailored to user requirements.

In conclusion, GE's WLE4000, WASE5210, WBSE3120, WWSE5200, and WCSE4160 models represent the forefront of energy management technology. Each model brings its own set of features tailored to different segments, promoting efficiency, sustainability, and advanced operational capabilities in diverse energy settings.