GE WLE4000 Tips, Consumer Support, Troubleshooting, 2nd Rinse Option on some models, AutoTemp

Models: S4200 WSSE5210 WCSE4160 WWSE5200 WBSE3120 WASE5210 WLE4000

1 16
Download 16 pages 35.29 Kb
Page 7
Image 7
About washer features.

About washer features.

GEAppliances.com

2nd Rinse Option (on some models)

When you use extra detergent or bleach to clean heavily soiled clothes, you may want to use the 2nd Rinse option. It provides a second deep cold rinse.

Extended Spin Option (on some models)

Use this option to extract more water from your clothes. Clothes will be drier when this option is selected and will dry more quickly in your dryer.

Auto Soak (on some models)

(appearance and features may vary)

This option adds a short agitation and soaking period at the beginning of the selected wash cycle.

 

AutoTemp (on some models)
AutoTemp

AutoTemp senses the incoming water temperature and adjusts the cold water temperature

to ensure that the incoming cold water is warm enough to dissolve the detergent.

 

 

Often, detergents are not completely dissolved in very cold water, especially in cooler climates.

 

 

 

 

 

Liquid Bleach Dispenser

 

The dispenser dilutes liquid chlorine bleach before it reaches into your wash load.

 

 

 

Check clothing care labels for special instructions.

 

1

 

 

 

Measure liquid bleach carefully, following instructions on the bottle.

 

2

 

 

 

Never pour undiluted liquid chlorine bleach directly onto clothes or into the wash basket.

 

 

 

Do not pour powdered bleach into bleach dispenser.

 

 

 

Before starting the washer, pour measured amount of bleach directly into bleach

 

 

3

 

 

dispenser. Avoid splashing or overfilling dispenser. If you prefer to use powdered

 

 

 

 

 

bleach, add it into the wash basket with your detergent.

 

 

 

Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover.

 

 

 

Mixing can produce a toxic gas which may cause death.

Cleaning the Fabric Softener Dispenser

Safety Instructions

Operating Instructions

Troubleshooting

1

2

3

Separate for cleaning.

Remove the dispenser from the top of the agitator.

Separate the dispenser cup from the cover by grasping the top and pushing down on the inside of the cup with your fingers. Dispenser cup will pop free from the cover.

To clean the dispenser, soak both the dispenser cup and the dispenser cover in the following solution:

1 US gallon (3.8 liters) warm water1/4 cup (60 ml) heavy-duty liquid detergent1 cup (240 ml) bleach

Tips

4 If necessary, loosen buildup with a clean, soft cloth after soaking. Do not use a stiff brush; you may roughen the surface of the dispenser.

5 Rinse and reassemble dispenser. Place dispenser back on the agitator.

7

Consumer Support

Page 7
Image 7
GE WLE4000 Tips, Consumer Support, Troubleshooting, 2nd Rinse Option on some models, Extended Spin Option on some models