English | Cleaning |
|
|
|
|
| |
3 | We recommend to clean your | ||
| shaver with the “sonic” vibration | ||
| cleaning when | appears in the | |
| LCD panel. |
| |
| 1. | Disconnect the power cord | |
|
| from the shaver. | |
| 2. | Apply some hand soap to the | |
4 |
| outer foil. |
|
3. | Press the On/Off switch for | ||
Caution for turbo mode
•Shaving in turbo mode may damage your skin. Turn the shaver off and then on again to cancel turbo mode.
•Do not place your fingers on the On/Off switch while using the shaver. This may cause the shaver to turn off or enter turbo mode. Place your fingers on the finger rest while using the shaver.
Replacing the system outer foil and the inner blades.
system outer foil | once every year |
inner blade | once every two years |
| more than 2 seconds to |
| activate the turbo mode for |
| “sonic” vibration cleaning. |
| • appears in the LCD panel. |
| • After about 20 seconds, it will |
| be automatically turned off, |
| or you can turn it off by |
| pressing the On/Off switch. |
| 4. Remove the system outer foil |
| and press the On/Off switch |
| for more than 2 seconds to |
| activate the turbo mode for |
| “sonic” vibration cleaning and |
6 | clean it with running water. |
| 5. Wipe off any drops of water |
| with a dry cloth. |
| 6. Remove the system outer foil |
| to allow it to dry completely. |
6 |
|
1
2.32 3
4
1.Press the buttons and lift upwards as illustrated.
2.Remove the inner blades one at a time as illustrated.
•Do not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3.Insert the inner blades one at a time until they click as illustrated.
4.Insert the system outer foil by pushing it downwards until it clicks.
