GE ZBD1870 Control Panel, Delay Hour, Selection, hours will show in the display window, Starting

		Control Panel
			Dishwasher
3	DELAY HOUR	This option allows you to delay the start of a wash cycle for up to 24 hours.
	SELECTION	With the door open, turn the dishwasher ON by pressing the ON/OFF button; then press DELAY
		HOURS button to choose the number of hours you want to delay the start of the wash cycle. The
		hours will show in the display window.
		NOTE: To cancel the DELAY HOURS option before the start of the cycle, repeatedly press the
		DELAY HOURS button until the display is blank or reads “00.”
4
	STARTING	After selecting the wash cycle (Step 2) and delay hours (Step 3), if desired, close the door of the
	A CYCLE	dishwasher to start the cycle or begin the DELAY HOURS countdown. When the cycle starts, the
		drain begins and approximately 60 seconds later the water fill begins.

5STATUS INDICATORS

LOW RINSE AID The red light will display when the rinse aid dispenser needs to be refilled with liquid rinse aid. Use

of Jet-Dry®or Cascade Crystal Clear® rinse agent removes spots and prevents new film buildup on your dishes, glassware, flatware, cookware and plastics. See page 6 for instructions on refilling the rinse aid dispenser.

CLEAN The green light will display and a beep will sound to alert you that the wash cycle is complete.

7