Care and Cleaning
Dishwasher
Cont y ol
Panel
Protect
Against
Freezing
The Air
cap
Caring for GPF400S
Optional Accessory
To clean the control panel use a lightly dampened cloth then dl T thoroughly. To clean the exterior use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
If your dishwasher is left in an unheated place during the winter, ask a seta4ce technician to:
1.Cut offelectrical power to tt_e dishwasher. Remove filses or trip circuit breaker.
2.Turn offthe water supply anti disconnect the water inlet line from the water valve.
3.Drain water from the water inlet line anti water valve. (Use a pan to catch the water.)
4.Reconnect the water inlet line to the water valve.
5.Remove the plastic sump cover in the mb
bottom and use a sponge to soak up water in
the rubber boot.
An air gap protects your dishwasher against water backing up into it if a drain clogs. The air gap is not a part of the dishwasher. It is not covered by your warranb_. Not all plumbing codes require air gaps, so you may not have one.
The air gap is easy to clean.
1. Turn off the dishwasher anti lift off the
chrollle cover.
2.Unscrew the plastic cap anti clean with a toothpick.
The stainless steel panels can be cleaned with Stainless Steel Magic or a similar product using a clean, soft cloth.
You can order Stainless Steel Magic # WX10X15 through GE Parts in the USA, by calling 800.626.2002. In Canada, call 1.888.880.3030.
The stainless steel control panels can be cleaned with Stainless Steel Magic or a similar product using a clean, soft cloth.
You can order Stainless Steel Magic # WX10X15 through GE Parts in the USA, by calling 800.626.2002. In Canada, call 1.888.880.3030.
Sumpcoverscrews
Two types of air gaps
Check the air gap any time your dishwasher isn't draining well.
15