GE ZBD6700, ZBD6400, ZBD6900, ZBD6500, ZBD7100 Operation - ZBD6600, Start a wash load, Dishwasher

Models: ZBD7000 ZBD7100 ZBD6700 ZBD6500 ZBD6600 ZBD6900 ZBD6400

1 32
Download 32 pages 31.98 Kb
Page 11
Image 11
Operation — ZBD6600

Start a wash load

Operation — ZBD6600

Dishwasher

To start the dishwasher, close the door until it locks in place. To start the last selected cycle, press the START button. To select a different cycle, turn the knobs to the desired WASH CYCLE and HEAT OPTIONS and press the START button.

NOTE: Not all heat options are available for all cycles. If a combination that is not available is selected, the lights will flash when the START button is pressed and the cycle will not start.

 

 

 

HEAT OPTIONS

 

 

 

 

 

 

 

SANITIZE

 

 

NORMAL

 

 

HIGH

(INCLUDES

Wash Cycles

 

& HEAT

 

HIGH

TEMP &

HEATED

NORMAL

DRY

 

TEMP

HEAT DRY

DRY)

POTS & PANS

 

NORMAL WASH

 

CHINA CRYSTAL

 

SPEED WASH

 

RINSE ONLY

 

 

 

 

 

 

 

 

To interrupt/pause a cycle gently open the door just enough to turn off the wash motor. Do not fully open the door until the wash action ceases.

Manual background CAUTION: Be careful when opening the door; the hot steam that escapes when the door is opened may cause injuries. Stand back as you open the door and allow the steam to escape.

Manual background ATTENTION : Faites attention lorsque vous ouvrez la porte. La vapeur brûlante qui s’échappe lorsque vous ouvrez la porte pendant un programme de lavage peut causer des brûlures. Lorsque vous ouvrez la porte, reculez et laissez la vapeur s’échapper de l’appareil.

To restart the wash process, close the door until it locks in place. There may be a time delay of up to a few minutes because the temperature inside your dishwasher needs to stabilize before it restarts the wash cycle.

To cancel the cycle after it has started, press and hold the START/CANCEL button for 3 seconds. The dishwasher will start to drain and the cycle indicator lights will flash. At this point a new wash cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out after the dishwasher drains completely. If you have selected a new wash cycle, remember to add more detergent to the detergent compartment if required.

11

Page 11
Image 11
GE ZBD6700, ZBD6400, ZBD6900, ZBD6500, ZBD7100, ZBD7000 owner manual Operation - ZBD6600, Start a wash load, Dishwasher