GE ZBD6605 ZBD6905 ZBD7005 ZBD7105 owner manual Water does not empty

Questions?

Use this problem solver

PROBLEM	POSSIBLE CAUSE	WHAT TO DO
Water does not empty	Outlet blocked	• Check garbage disposal and air gap
out of Chef’s Washer		for blockage.
(flashing RINSE ONLY		• Check outlet hose for kinks and sharp bends.
light) (on models
ZBD6905, ZBD7005 and
ZBD7105)
Chef’s Washer continues	Faulty fill valve	• First, turn off water supply valve, then turn
to drain indefinitely		off circuit breaker and call for service.
Yellow color on dishes	Water has iron or other	• A special filter in the water supply line is
and glassware	mineral content	the only way to correct this problem.
		Contact a water softener company.
White film on glasses;	Hard water	• Try progressively increasing the Rinse Aid
tea and coffee stains		setting to 6. See the Rinse Agent section.
	Repeated use of Sani	• Discontinue use of Sani option.
Brown spots or pitting	Consistently low water	• Check that operating water level is between
of stainless steel;	level in Chef’s Washer	the MIN. and MAX. indicators on lower
tarnishing of silver		spray arm support tower. See Care and
		Cleaning section.
	Electrolysis following	• Wash scratched or worn pieces by hand.
	contact with other metals	Polish silverware with a silver-plate cleaner.
	Detergent thrown over the	• Load detergent properly. See Using the
	cutlery or saucepans	Chef’s Washer section.
Light goes out		• Call for service.

25