GE ZDBR240 owner manual QuickSpace shelf, Glass shelves

Controls and Features

Beverage Center

Glass shelves

Tempered glass shelves in the beverage center unit are removable for easy cleaning or for storing larger items.

To remove a shelf, open the door completely to avoid potential damage to the gasket. Lift up on the back of the shelf slightly. Tilt the shelf to one side at an angle while pulling forward.

Appearance may vary

To replace a shelf, open the door completely to avoid potential damage to the gasket. Tilt the shelf to one side at an angle and slide toward the back wall, placing one side onto the shelf support. Place the other side onto the opposite shelf support. Ensure rear locking tabs are engaged. When installed properly, the shelf will not slide forward when gently pulled.

QuickSpace ™ shelf

To remove, lift up on the back of the	Tilt the shelf at an angle while removing	Place in slots when replacing the shelf
shelf	or replacing

This shelf splits in half and slides under itself	Step 1
for storage of tall items on the shelf below.
Step 1: Lift the back edge of the front half of
the shelf.
Step 2: Pull slightly forward.	Step 2

Step 3: Lower the back edge of the front half of the shelf while sliding it underneath the back half.

The entire Quick Space shelf can be removed and replaced (see Glass Shelves section).

Step 3

9