Windows 95/98/Me/NT/2000/XP Installation Procedure
Please perform the steps as follows to ensure a smooth installation:
1.Run Setup from the print server’s NetWare, Win 95/98/Me/NT/2000/XP Setup diskette
2.The Network Print Monitor for Windows 95/98/Me Setup will then appear. Click Next.
3.A message reading, “Setup is complete. You may add the Network Print Port by using the PSAdmin” will appear. Click OK.
4.Click Start, point to Settings, and select Printers.
5.
6.Select Local Printer and click Next.
7.Select the appropriate printer manufacturer and printer type and click Next.
8.Select LPT1 and click Next.
9.Type in the Printer Name and click Next.
10.A message reading, “After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly.” Select No and click Finish.
11.
12.Select Printer and Properties.
13.Click Details tab and select Add Port.
14.In the Add Port dialog box, select Other, as shown in the following picture.
52
