TRENDnet TEW-P1P, TEW-P1U SUN Solaris, a. Do you want to install or remove printing i/r/q ? q

After this step, the Remote Printer Configuration appears. Answer the questions as follows:

a.Do you want to install or remove printing (i/r/q) ? [q] : -----> i

b.Do you wish to change the printer description file /etc/printcap (y/n) [n] ? --------->

y

c.Enter information for remote printers or local printers accepting remote printing requests

Please enter the printer name (q to quit): --->printer-1You can enter a printer name you like in this option.

d.Is xxxx a remote printer or a local printer (r/l) ---------> r

e.Please enter the name of the remote host that xxxx is attached to: --------->the Print server‘s IP address you specified in Step 2, for example, 192.72.214.103

Note: You can add the host name associated with the IP address in the /etc/hosts file. If you have done this, please use the host name instead of the IP address.

f.Printer xxxx is connected to host 192.72.214.103 Is this correct? (y/n) ---------> y

g.After it shows some messages, it will ask you a question. If you‘re not sure, answer ‘n’? (y/n) [n] --------> n

h.Would you like this to be the system default printer? (y/n) [n]------->answer this question if you like to make it as a default printer.

i.Do you want to install or remove printing (i/r/q)? [q] : -------> q

j.Do you want to star remote daemon now (y/n) --------> y

11.Done. Submit print jobs by using “lp” or “lpr” command. For example: lp -d printer-1 /etc/printcap

SUN Solaris 2.x

1.Login root

2.Type “arp -s <IP address> < Print server‘s node ID>”

The node ID can be found from the white label on the backside of the Print Server. For example:

arp -s 192.72.214.103 00:40:01:05:01:8c

3.Type “ping < Print server‘s IP address>” For example:

ping 192.72.214.103

(You should get the responses from the Print Server).

61