Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server.

IP Address: This option allows you to view IP address from the print server. The IP address must meet the IP addressing requirements of the network segment.

Subnet Mask: This option allows you to view subnet mask from the print server. The IP address must meet the IP addressing requirements of the network segment.

Gateway’s IP: This option allows you to view gateway from the print server. This IP address of gateway must meet the router or gateway to go across of the network segment.

Netware Status:

1.Click Status, it then appears the sub-menu.

2.Click Netware it then as shown in the following picture.

36

Page 37 Page 39
Page 38
Image 38
TRENDnet TEW-P1U, TEW-P1P manual Netware Status
Page 37 Page 39
Top Page Image Contents