GE ZDP48N6DHSS6 dimensions ZDP48N6DHSS ZDP48L6DHSS, Dimensions and Clearances in inches

ZDP48N6DHSS

ZDP48L6DHSS

(Natural Gas) (Liquid Propane)

–GE Monogram 48" Dual Fuel Professional Range with 6 Burners and Griddle

Dimensions and Clearances (in inches)

Professional ranges offer a number of choices in size and cooktop configurations.

All Professional Ranges are factory set for natural or liquid propane gas. The correct model should be ordered for the installation situation.

48" Natural Gas Model ZDP48N6DHSS–6 gas burners and griddle

48" Liquid Propane Gas Model ZDP48L6DHSS–6 gas burners and griddle

Note: Conversion kits (WB49X10132, Natural to LP and WB49X10133, LP to Natural) are available if the wrong gas type was ordered. High Altitude kit, WB49X10130 (for Natural and LP gas models), is also available. The kits must be installed by a qualified service technician at additional cost.

Installation Information

Before installing, consult installation instructions packed with product or online at Monogram.com for current dimensional data.

A 48" or 54" wide professional vent hood with a minimum 1200 CFM is recommended for installation over this range.

Advance Planning

Refer to dimensional drawings for appropriate placement and necessary clearances when planning the installation.

•Cabinetry cannot be installed directly above the range.

•Working areas adjacent to the range should have 18" minimum clearance between countertop and cabinet bottom.

•Clearance between range and side wall or combustible material must be at least 12" on each side.

If the range is installed in an island

•Allow 12" minimum clearance at the back to combustible materials.

•Allow 36" minimum above the cooking surface to combustible materials.

•The vent hood blower should provide at least 1200 CFM.

•Installation must conform with local codes. In the absence of local codes, the range must comply with the National Fuel Gas Code, ANSI Z223.1-1990.

22"

12"

1-1/2"

35-1/4"

to

36-3/4"

28-1/4"47-7/8"

Clearances between range and side wall or combustible material must be at least 12" on each side.

Specification Revised 10/05

Listed by

Underwriters

RLaboratories

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000.

130550