GE ZIFS36N LH, ZIFS36N RH, ZIRS36N LH, ZIRS36N RH At End-of-Run, Frameless Cabinets, Dimensions

5
Design Information
36" Stainless Steel Refrigerators, Freezers
Installation
At End-of-Run
Frameless
Cabinets
NOTE: 1/2" thick side panels shown.
Side panels can be any thickness.
Add side panel thickness to outside
trim width, (36” or 72" for two models)
to calculate the rough-in dimension.
The leading (front) edge must be
finished to match surrounding
cabinetry.
Side panels, 1/2" minimum thickness are required when
using frameless cabinets. The side panel acts as a
spacer between the cabinet and the case trim and
prevents interference with cabinet door swing.
The leading (front) edge must be finished to match
surrounding cabinetry.
1/2" To 3/4" Side Panels. Leading
Edge Flush With Cabinet
Refrigerator or Freezer
Refrigerator and Freezer
installed side-by-side
37"
1/2" Thick
Side Panels
36"
Finished Dim.
Roughed-In Dim.
Cabinet
Refrigerator
Cabinet
Refrigerator door
73"
1/2" Thick
Side Panels
72"
Finished Dim.
Rough-In Dim.
Refrigerator
Cabinet
Refrigerator door
ZIRS36N RH, Refrigerator
ZIFS36N RH, Freezer
Handle on the left side, the door swings left to right.
ZIRS36N LH, Refrigerator
ZIFS36N LH, Freezer
Handle on the right side, the door swings right to left.
Product
Dimensions
CAUTION
PRUDENCE
Refrigerators are much heavier at the top than at
the bottom – be extra careful when moving.
Les réfrigérateurs sont beaucoup plus lourds en
haut qu’en bas. Il faut être prudent lors des
déplacements.
10-3/4" Max.
10" Min.
24-3/4"
35" Case
36" Overall
84-1/2" Max.
83-1/2" Min.
4"
73-1/2"
26-3/4"