Microwaving

Advantium Oven

To use all sensor programs

Advantium’s microwave mode features sensor cooking. The oven automatically senses when food is done and shuts itself off—eliminating the need to program cooktimes and power levels.

1.Press the MICROWAVE/OVEN LIGHT button.

2.Turn the dial to select the food you want. Press the dial to enter.

3.Press the dial or press the START/ PAUSE button to start cooking.

Do not open the oven door until time is counting down in the display. If the door is opened, close it and press START/PAUSE immediately. If the food is not done enough, use TIME COOK in the microwave selector to cook for more time.

NOTE: Do not use the Sensor Features twice in succession on the same food portion—it may result in severely overcooked or burnt food.

If you have been speedcooking and the oven is already hot, it may indicate that it is too hot for sensor cooking. Of course, you can always continue with TIME COOK or SPEEDCOOK.

To shorten or lengthen the cook time, wait until the time countdown shows in the display. Then turn the dial to add or subtract time.

Drinks heated with the BEVERAGE feature may be very hot. Remove the container with care.

If you open the door while SENSOR Cooking, SENSOR ERROR will appear. Close the door, press START to begin again.

Notes about the Reheat program:

Reheated foods may have wide variations in temperature. Some areas may be extremely hot.

It is best to use TIME COOK and not REHEAT for these foods:

Bread products

Food that must be reheated uncovered.

Foods that need to be stirred or turned.

Foods calling for a dry look or crisp surface after reheating.

29

Page 29
Image 29
GE ZSC2000, ZSC2001 owner manual To use all sensor programs