Questions?

Use this problem solver

Troubleshooting

Advantium Oven

Problem

Possible Causes

What To Do/Explanation

LIGHTS

 

 

 

 

 

There is no oven

This is normal. The

Press MICROWAVE/OVEN

light on during

glass is too dark for

LIGHT button to light the oven.

microwave cooking

a microwave light.

 

 

 

 

Light during a

This is normal.

This is normal. The oven senses the

speedcook cycle

Power level has been

heat level and adjusts automatically.

dims and cycles on

automatically reduced

 

and off, even at full

because the oven is hot.

 

power levels

 

 

 

 

 

Light visible around

This is normal.

When the oven is on, light may

the door and outer

 

be visible around the door and

case while

 

outer case.

speedcooking

 

 

 

 

 

FAN

 

 

 

 

 

Fan continues to run

The oven is cooling.

The fan will automatically shut off

after cooking stops

 

when the internal parts of the oven

 

 

have cooled.

 

 

Oven vent emits warm This is normal.

 

air while oven is on

 

 

 

 

 

Fan comes on

This is normal.

If the microwave is used after

automatically when

 

speedcook and the oven senses

using the microwave

 

that it is too hot, the vent fan comes

 

 

on to cool the oven.

 

 

 

COOKING

 

 

 

 

 

The oven makes

Clicks and fans blowing

These sounds are normal.

unusual sounds

are normal. The relay

 

while cooking

board is turning the

 

 

components on and off.

 

 

 

 

Smoke comes out

Food is high in fat

Smoke is normal when cooking high-

of the oven when

content. Aerosol spray

fat foods. Use vegetable oil or olive

I open the door

used on the pans.

oil on the meat itself instead of

 

 

coating the entire pan.

 

 

 

Food is not fully

Programmed times

Increase or decrease time for

cooked or browned

may not match the size

doneness or adjust the upper or

at the end of a

or amount of food you

lower lamps for browning; change

cooking program

are cooking.

the microwave power for doneness.

 

 

 

 

There may be grease

Clean the light covers with a scraper.

 

buildup on the glass

 

 

covers.

 

 

 

 

38

Page 38
Image 38
GE ZSC2001, ZSC2000 owner manual Questions? Use this problem solver, Troubleshooting