GE ZV370YSS--30 Soffit Installation, WALL MOUNT INSTALLATION Ceiling, Wall Mount Installation

Monogram.™

ZV370YSS—30" Professional Vent Hood

Dimensions and Specifications (in inches)

SOFFIT INSTALLATION

30" Hood Top View - Front Side

5-1/2"

2-1/2"

Junction

4-

1/4"

3-

1/8"

5-1/2"

Box

3"

11-7/16"

7"

11-7/16"

12"

3"

3/4"

2-

7/8"

12-7/16"

12-7/16"

29-7/8"

Back Side

WALL MOUNT INSTALLATION

Ceiling

Created 1/98

Soffit Installation:

•Drill 3/16" pilot holes through the shims and into the soffit studs.

•Hold the hood against the soffit and secure with six lag screws with washers.

•For additional support and to minimize vibration during operation, we recommend that the hood be secured to the back wall.

•Drive lag screws through the rear panel of the hood and into the wall studs.

Wall Mount Installation:

•Drill 3/16" pilot holes, approximately 1-1/2" deep, in all mounting screw locations.

•Hold the hood in position and drive lag screws in top left and right mounting holes.

Note: 5/16" hanger bolts can be used in the two top locations. Place the hood onto the hanger bolts and secure with nuts and washers.

•Install lag screws with washers in remaining mounting holes.

Installation Information:

Before installing, consult installation instructions (Pub. No. 49-8816) packed with product for current dimensional data.

30" Hood Rear View

		Ceiling Drywall
		6" or 12"
		Duct
		Cover
	Mounting
18"	Screw	6-1/2"
	Holes
		2-1/2"
	C	6-1/2"
	L
6”	8-15/16” 8-15/16”	6”
	29-7/8”

For answers to your Monogram,®GE Profile

Performance Series,™ GE Profile,™ GE,

Hotpoint and RCA appliance questions, call

GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

RLaboratories