Operating Instructions
Stainless Steel Refrigerator
Temperature controls
The temperature controls are preset in the factory at 37°F for the fresh food compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SEt temperature as well as the actual temperature in the fresh food and freezer compartments. The actual temperature may vary slightly from the SEt temperature based on usage and operating environment.
Setting either or both controls to oFF stops cooling in both the freezer and fresh food compartments but does not shut off electrical power to the refrigerator.
NotE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.
To change the temperature, press and release the 
(warmer) or 
(colder) pad. The SET light
will come on and the
display will show the set temperature. To change the temperature, tap either the 
(warmer) or 
(colder) pad until the
desired temperature is displayed. Fresh food temperatures can be adjusted between 34°F and 44°F and the freezer temperatures can be adjusted between
Once the desired temperature has been set, the temperature display will return to the actual fresh food and freezer temperatures after 5 seconds. Several adjustments may
be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.
To turn the cooling system off, tap
the 
(warmer) pad for either the fresh food compartment or the freezer until the display shows OFF. To turn the unit back on,
press
the 
(colder) pad for either the fresh food compartment or freezer. The SET light will
illuminate on the side you selected. Then press the 
(colder) pad again (on the side where
the SET light is illuminated) and it will go
to
the preset points of 0°F for the freezer and 37°F for the fresh food compartment.
Performance
Air Flow
System
The Performance
Although the Air Tower and the Air Tunnel
can be removed, doing so will affect temperature performance. (For removal instructions,
8
