INSTALLATION & SETUP
IMPORTANT INSTALLATION INFORMATION
•Never install telephone wiring during a lightning storm.
•Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface.
•Use caution when installing or modifying telephone lines.
INSTALLING THE BATTERIES
Your Caller ID phone uses 4
IMPORTANT: You will have approximately 60 seconds to replace the batteries before the memories stored are lost. Please read the instructions before replacing the batteries and have the batteries ready to be inserted beforehand.
1.If the line cord is already connected, disconnect it from the base unit.
2.Use a screwdriver to pry up the battery compartment door on the bottom of the phone.
3.Insert 4
4.Snap the battery compartment door back into place.
5.If the line cord was previously connected,
6
