Care and Cleaning

Built-In Refrigerators

Type 2 bulb replacement

NOTE: Before replacing the bulbs, review the light bulb information and WARNING.

Replacing Type 2 bulbs in lamps located in the top of the Climate Control drawer:

1.Set the Master Light switch to the OFF position (see Using the Master Light switch) and allow the lamps to cool.

2.To access the lamps, remove the second produce pan. See Drawer and Pan Removal section.

3.The lamps at the back, that face up, can be lifted out. To access the lamp that shines into the Climate Control drawer, twist the holder until the arrow points towards the back of the refrigerator, then lift up.

4.Turn the lamp

protector to access the bulb.

NOTE: Always follow bulb manufacturer’s directions for handling and replacing bulbs.

5.Remove the bulb by holding the base and pulling straight out. Replace with a new bulb and replace the lamp protector.

WARNING – Lamp protectors must be replaced or the heat from the bulb could damage the refrigerator.

AVERTISSEMENT :

Lower lamp assemblies

Climate Control drawer lamp

Vous devez remettre en place les écrans protecteurs des ampoules pour ne pas endommager votre réfrigérateur avec la chaleur produite par les ampoules.

6.Reset the Master Light switch to the ON position.

23

Page 23
Image 23
GE Monogram 48, 42 owner manual Climate Control drawer lamp