Window Installation Instructions
3REMOVE THE AIR CONDITIONER FROM THE CASE (cont.)
ERemove the locking screw and locking bracket from the lower frame. Save to reinstall later.
FRemove the ground screw and save to reinstall later.
Remove the ground screw and save to reinstall later
GSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.
4PREPARE THE WINDOW
Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.
5PREPARE THE CASE
AInstall the top mounting rail with 4 type B screws from the inside of the case.
Press firmly to drive the screws into the gasket and through the top mounting rail.
Top mounting rail
BInsert the frames for the accordion panels into the top mounting rail and the bottom frame guides. Attach the accordion panels to the side of the case using 3 type A screws on each side.
NOTE: When attaching the accordion panels, make sure to only screw the inner panels to the case sides.
Top mounting rail
Type A | BACK | |
screws | ||
| ||
| Bottom mounting rail |
10
