Window Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
18″ min.
30″ to 41″
(With accordion panels)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.
To adjust for this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame or the vinyl frame.
Attach securely with nails or screws provided by the installer.
3REMOVE THE AIR CONDITIONER FROM THE CASE
ARemove the inlet grille.
BRemove the filter.
CRemove the painted screws from each side and the screw in the front. Save to reinstall later.
Screw
Screw
Screw
DGrasp the lower corners of the grille frame while pressing in on the case side tabs with your finger tips. Pull out to release and lift it up.
NOTE: Do not pull the bottom edge toward you more than 3″ or you may damage the tabs of the grille.
1/2″ higher 
than storm window 
frame
Storm window 
frame
1/2″ higher
than vinyl frame (on some windows)
Wood
Stool
Vinyl frame
9
