Temperature controls

Operating Instructions

Bottom Freezer Refrigerator

Preset Settings

Allow 24 hours to reach these preset temperatures.

The temperature display shows the actual temperature of the freezer and fresh food compartments. The actual temperature will vary from the set temperature based on factors such as frequency of door opening, amount of food, defrost cycling and room temperature.

NOTE: Frequent door openings or door left open for periods of time may increase the internal temperature of the freezer and fresh food compartments temporarily.

To check the current temperature setting for the fresh food or freezer compartment, press the + or – pad once. After 5 seconds, the display will return to the actual temperature.

To change the temperature settings, press the + or – pads to desired temperature set point for fresh food and freezer separately. Allow

24 hours for the refrigerator to reach the temperature you have set.

Temperature Ranges

To turn off the cooling system in both the freezer and fresh food compartments, press either + pad until both displays show OFF.

To turn the cooling system on, press either

pad. The preset temperatures of 0°F and 37°F will appear in the display.

 

 

Low

 

High

 

Fresh Food

 

34°F

 

45°F

 

 

 

1°C

 

7°C

 

Freezer

 

–6°F

 

+6°F

 

 

 

–21°C

 

–14°C

 

 

 

 

 

 

 

NOTE: Setting the controls to OFF stops cooling, but does not shut off electrical power to the refrigerator.

Changing display temperatures from °F to °C

To change the temperature display between Fahrenheit and Celsius, press the Temp

Display °C/°F.

Door alarm

To turn the Door Alarm feature on, press

When the DOOR ALARM

the pad once. The ACTIVE light will come on.

is active, the alarm will flash

To turn it off, press the pad again.

and beep if you keep the

 

door open for more than

 

2 minutes.

8

Page 8
Image 8
GE Monogram Bottom-Freezer Built-In Refrigerator Operating Instructions, Changing display temperatures from F to C