Storage drawers
Sealed snack pans
Drawer removal
Storage Drawers
Bottom Mount Refrigerator
These drawers have individual, adjustable humidity controls that let you control the amount of cold air entering the drawers.
Slide the control all the way to the High setting and the drawer provides higher humidity levels recommended for most leafy vegetables.
Slide the control all the way to the Low setting and the drawer provides lower humidity levels recommended for most fruits.
Excess water that may accumulate in the bottom of the drawers should be emptied and the drawers wiped dry.
The sealed snack pans retain high humidity for the convenient storage of lunch meats and cheese, hors d’oeuvres, spreads and snacks.
To remove a snack pan, pull the pan out and lift the front of the pan up until it snaps out of the wire holder.
To replace a snack pan, place the back of the pan in the wire holder. Lower the front of the pan, then push down until the front of the pan snaps into the wire holder.
Drawers in the fresh food compartment will stop before coming all the way out of the refrigerator, to help prevent contents from spilling onto floor.
To remove a drawer, pull the drawer out and lift the front of the drawer up and out of the wire holder. Lift the back of the drawer up and out.
To remove the drawers when the refrigerator door cannot be opened fully, the shelf above the drawers must be removed. Push the shelf back then lift up. Tilt the cover and take it out.
To replace a drawer, place the back of the drawer in the wire holder, making sure the extensions of the side of the drawer fit into the back of the wire holder. Lower the front of the drawer into the wire holder. Press firmly on the top of the drawer.
10
