Installation Instructions

INSTALL BRACKET WITH TRANSFORMER (Built-In Models Only)

Mount the bracket to the back wall of the enclosure with 4 screws (not supplied).

Slide the battery compartment from the top, straight down, engaging the side slots.

Battery/Fuse

Compartment

Bracket

Side Slots

NOTE:All connectors are polarized to connect correctly.

Join transformer connectors.

Join battery connectors.

Route the power cord through the enclosure to the electrical outlet .

Battery Connectors

Transformer

Connectors

Power Cord

INSTALL COOKTOP BRACKET WITH BATTERY COMPARTMENT

Mount the bracket to the back wall of the enclosure with 4 screws (not supplied).

Slide the battery compartment from the top, straight down, engaging the side slots. (If necessary, the bracket may be factory- assembled.)

Join battery connectors.

Battery Connectors

SECURITY LOOP

A stainless steel loop is welded to the bottom of the free-standing grill chassis near the back right wheel. To secure the grill, put a chain through the steel loop and padlock through a stationary, secured eyelet (chain, padlock and eyelet not provided).

Loop for securing free-standing grill with a chain (located on grill chassis bottom near the back right wheel)

19

Page 19
Image 19
GE Monogram Professional Outdoor Grills and Cooktop Install Bracket with Transformer Built-In Models Only, Security Loop