Shoulder Washers Engage Keyhole
Slots
Custom
Panel
Mark Center
Screw Holes

Panel Installation for Models ZBD7000 and ZBD7005

The custom panel should be prepared by your cabinet manufacturer according to the instructions shown on page 9. Use the supplied installation template to locate the mounting screws for the door.

STEP 1 DRAW

CENTERLINE

• Place the custom panel on a flat surface with appearance side down.

Locate the vertical center of the panel at the top.

Use a carpenters square to draw a centerline from top to bottom.

STEP 4 INSTALL CUSTOM HANDLE

Screws Must

Be Countersunk

Into Panel

4-1/2" Max.

From Top

of Panel

Handle

Custom

Door Panel

A custom handle must be installed onto the panel before the panel is secured to the dishwasher door.

The handle should be installed so that it aligns with adjacent drawer handles, or 4-1/2" max. from the top of the panel. Secure the handle in the same manner as cabinet handles.

STEP 2 ALIGN TEMPLATE

TO PANEL

• Trim template on the

dotted line along all sides.

• Place the template on the panel aligned with the top edge and the centerline.

Use tape to hold in place.

• Use an awl to mark the

screw hole locations indicated on the template.

• Remove the template.

STEP 3 INSTALL MOUNTING SCREWS AND WASHERS

If the panel is less than 3/4" thick, shorter screws must be used. Use #8 x 3/8" screws for 1/2" thick panels.

Use a 3/32" drill bit to drill pilot holes 3/32" deep in the marked locations.

Note: The custom panel is secured to the dishwasher door with the shoulder washers and screws provided. The washer will slip into the keyhole slots on the dish- washer door.

Shoulder Screw

Washer

Place shoulder washer over one hole and drive the supplied #8 x 1/2 Phillips pan head wood screws into the panel.

Install remaining washers and screws in the marked locations.

STEP 5 INSTALL PANEL

• Secure the panel to the door by inserting the top and bottom shoulder washers into the matching keyhole slots.

• Make sure all 4 washers engage the keyhole slots.

• Press the panel against the door and push downwards until the washers are fully engaged into the key hole slots. The panel should align evenly with the top and sides.

Dishwasher

Door

Stand the dishwasher upright.

Open dishwasher door

and drive the supplied

 

#6 x 2 Phillips screws

 

through the inner door

 

and into the custom

 

panel. Drive one screw

 

at the top and one on

Custom

each side as shown.

Panel

15

Page 15
Image 15
GE Monogram ZBD7105, ZBD6600, ZBD6500 Draw Centerline, Install Custom Handle, Align Template To Panel, Install Panel

ZBD6900, ZBD6905, ZBD7000, ZBD7005, ZBD7105 specifications

GE Monogram dishwashers, particularly the models ZBD7100, ZBD6905, ZBD6600, ZBD6700, and ZBD7005, epitomize luxury and advanced engineering in kitchen appliances. These models integrate cutting-edge technologies and exceptional design features to provide an unparalleled dishwashing experience.

The GE Monogram ZBD7100 stands out for its advanced wash system that uses a formidable triple filtration system to ensure impeccable cleaning results. This model includes a powerful Piranha hard food disposer that pulses food waste to ensure no debris clogs the wash arms. Furthermore, its sleek stainless steel design not only enhances aesthetics but also offers durability and resistance to smudges and fingerprints.

The ZBD6905 model features an efficient Quiet Package, which significantly reduces noise levels, making it one of the quieter dishwashers on the market. With a noise level of just 42 dBA, it allows users to enjoy a peaceful kitchen environment while dishes are being cleaned. This model also boasts a unique SmartDispense technology that automatically optimizes detergent use based on load size and soil levels, ensuring the best cleaning performance while minimizing waste.

Moving on to the ZBD6600, this dishwasher combines high performance with ease of use. It features a Load Size Sensor that adjusts the wash cycle to the amount of dishes being washed, saving energy and water. Its adjustable upper rack allows for versatility in accommodating tall items, and its specialized wash settings empower users to select cycles tailored to specific needs, from light cleaning to heavy-duty scrubbing.

The ZBD6700 is known for its energy efficiency, earning ENERGY STAR certification. It utilizes an eco-friendly wash cycle that minimizes water and energy consumption. This model also includes a Dry Boost option, which offers superior drying performance, ensuring that even plastic items are thoroughly dry at the end of the cycle.

Finally, the ZBD7005 model showcases a unique filtration system that captures food particles, further enhancing cleaning efficiency. It also incorporates a stunning interior LED lighting system that illuminates the dishwasher's interior, allowing users to easily load and unload their dishes.

Overall, GE Monogram’s ZBD series represents a blend of technological innovation, environmental consciousness, and elegant design, making these dishwashers an ideal addition to any luxury kitchen. With advanced washing systems, whisper-quiet operation, and customizable features, these models cater to the needs of modern homeowners seeking efficiency without sacrificing style.