Controls and Features
Outdoor/Indoor Refrigerator
Glass shelves
Tempered glass shelves in the outdoor/ indoor refrigerator are removable for easy cleaning or for storing larger items.
To remove a shelf, open the door completely to avoid potential damage to the gasket. Lift up on the back of the shelf slightly. Tilt the shelf to one side at an angle while pulling forward.
Appearance may vary
To replace a shelf, open the door completely to avoid potential damage to the gasket. Tilt the shelf to one side
at an angle and slide toward the back wall, placing one side onto the shelf support. Place the other side onto the opposite shelf support. Ensure rear locking tabs are engaged. When installed properly, the shelf will not slide forward when gently pulled.
To remove, lift up on the back of the shelf
Tilt the shelf at an angle while removing or replacing
Place in slots when replacing the shelf
QuickSpace ™ Shelf
This shelf splits in half and slides under itself for storage of tall items on the shelf below.
Step 1: Lift the back edge of the front half of the shelf.
Step 2: Pull slightly forward.
Step 3: Lower the back edge of the front half of the shelf while sliding it underneath the back half.
The entire Quick Space shelf can be removed and replaced (see Glass Shelves section).
Step 1
Step 2
Step 3
10
