GE Monogram ZDOD240 owner manual Built-InDimensions, Installation dimensions, Top canopy removal

Built-In Dimensions

Outdoor/Indoor Refrigerator

Installation dimensions

The outdoor/indoor refrigerator can be a free-standing model or can be built in using the cut-out dimensions below.

When building in the outdoor/indoor refrigerator, be sure to allow for a full door swing so you have full access to the pull-out full extension drawers.

See the Installation Instructions (Pub. No. 31-51542) for complete directions.

233/4″

(603 mm)

36″

(914 mm) (with top canopy)

233/4″

(603 mm)

Product dimensions:		NOTE:	Cut-out dimensions:
Height with		Handle and	Height: 341/2″ (876 mm) minimum
canopy: 36″ (914 mm)		handle standoff	Width: 233/4″ (603 mm) minimum
Height without		depth is 23/4″	Depth: 24″ (610 mm)
canopy: 341/2″ (876 mm)
Width:	233/4″ (603 mm)
Depth:	233/4″ (603 mm)

Top canopy removal

The top canopy may be removed when installing under a countertop.

The door MUST BE closed when removing or replacing the top canopy. To avoid damage, the top canopy must clear the left hinge center locking plate and right hinge.

•Remove the 3 screws from the back of the top canopy (A).

•Using heavy-duty work gloves, lift up on the top canopy back (B) and slide it forward until it unlatches from the unit (C).

•Lift the top canopy up and off of the unit.

NOTE: Keep the top canopy and screws for future free-standing installations.

NOTE: When installing the unit in a free-standing configuration, the top canopy must be left in place.

(B)

NOTE: Door MUST BE

(A)closed before removing or replacing the top canopy.

(C)

CAUTION: Under side edges of the stainless steel canopy top may be sharp. Wear heavy-duty work gloves when moving the top.

14