GE Monogram ZDW24 BB Install Leveling Legs, Slide the Unit into the Cutout, Installation

Installation

Beverage Center & Wine Chiller

• Tilt the unit slightly to one side to access the

bottom corner holes.

A.

Step3

Install

Leveling

Legs

• Install a U-Clip into the front and rear holes on the bottom as shown.

CAUTION: See illustration. Be sure the tangs on the clips are on the outside and the straight portion is inserted into the holes.

• Screw the leveling legs into the U-clips all

B.

the way until snug. Then, adjust the leveling legs to installation height.

• Follow the same procedure for the opposite side.

C.

D.

Step4

Slide the Unit into the Cutout

•Move the beverage center/wine chiller close to the opening.

•Connect the power cord plug to the properly grounded receptacle.

•Slide the unit into the opening.

Monogram

	SunkistCheck
	kist
SunkistCheck
kist

7