Installation dimensions
|
| |
|
|
|
|
| Wine Chiller |
|
| |
The wine chiller can be a | When building in the wine chiller, be sure | |
model or can be built in using the | to allow for a full door swing so you have | |
dimensions below. | full access to the | |
| See the Installation Instructions for | |
| complete directions. |
603 mm | 603 mm |
|
|
876 mm
NOTE: |
|
Handle and handle standoff | Height: |
depth is 45 mm | Width: 603 mm minimum |
| Depth: 610 mm minimum |
Product clearances
The wine chiller is factory set for a 110° door swing.
When installed in a corner:
•Allow 100 mm minimum clearance on the hinge side for the 90° door swing and to allow racks to slide out.
•Allow 360 mm minimum clearance on the hinge side for a full 110° door swing.
•The door swing is reversible on all models. If desired, change the door swing before installation.
Choose the location:
360 mm Min.
to Wall
110°
90° Door Swing
530 mm
600 mm
90°
100 mm Min.
to Wall
•These products may be closed in on the top and three sides as long as the front is unobstructed for air circulation and proper access to the door.
•Do not install these products where the temperature will go below 55°F (13°C) or above 90°F (32°C).
•Do not install where it will be subject to direct sunlight, heat or moisture.
Black or Stainless Steel Toekick Options
These products are shipped with a black toekick installed. An optional stainless steel toekick is also supplied with each product. For shipping purposes, the stainless steel toekick is secured to the back of the unit.
10